In general, the vibration of most rotating machines is mostly monitored by eddy current displacement sensors and vibration speed sensors.
      For vibration monitoring and fault diagnosis of rolling bearing and gearbox machines, acceleration sensors are used because their fault information is mostly reflected in high-frequency components. The acceleration sensor is very sensitive to high-frequency signals.
      The requirements for sensors in industrial sites are high. The requirements are: high reliability, strong anti-interference ability, and a wide range of use.
      MLAS-030 type acceleration sensor has the above characteristics, it is specially designed for on-site fault diagnosis.

◎ Sensitivity: 100mV / g ± 7% (or according to user requirements)

◎ Frequency range:

3Hz ~ 10KHz (± 0.5db)

1Hz ~ 15KHz (± 3db)

◎ Maximum vibration acceleration: 80g

◎ Operating temperature range: -30 ℃ ~ 80 ℃

◎ Installation resonant frequency:> 20KHz

◎ Size: Φ28 × 50mm

◎ Weight: about 70 grams

◎ Mounting thread: M8 studs

◎ Supply voltage: -24V

◎ Bias voltage: -12V